Patch — where it appears
Named by 30 essays across 6 fields — each of them below, with the objects they name alongside it.
Where the paper stops
Every flat-folding theorem is a statement about a full turn of paper, so a vertex at the edge of the sheet is subject to none of them. Cutting a patch out of a pattern removes conditions rather than preserving them, and a small enough patch has almost none left.
A unit that folds is not a tessellation
Of the 512 repeating rules for the waterbomb tessellation, 56 pass every condition on a two-by-two patch and 32 pass on every larger one. The twenty-four that die were never foldable — the small patch simply contained one of the four kinds of vertex the pattern makes, and the failures were at the other three.
The loop is not the tangle
A search that finds a contradiction in a pattern's letters reports the first circle it meets, and on a tessellation patch that is eight to twelve panels of forty-nine. It reads as a local fault. Decompose the same arrows a second way and the set of panels that lie on some circle is thirty-five of forty-nine on the square patch and ninety-nine of a hundred and fifty-seven on the rhombille — which is why the smallest available repair does not reach it, and cannot be tried on most of the creases at all.
Letters that agree get rarer
Two hundred letterings drawn independently from a square twist tessellation patch, and twenty-six of them have letters that do not contradict themselves. On the next patch up it is five, then two, then none, then none. What the share falls with is not the size of the patch and not the angle of its twist: it is the number of independent closed chains its panels form, which is Euler's relation on the drawing and is fixed before a single letter is chosen.
The lettering nobody could draw
Two hundred letterings drawn at random from the rhombille tessellation patch, and not one of them agrees with itself. Two thousand, and still not one. The patch was left as an open question — and it has an answer, found in five hundred and sixty-one steps by a search that tests the arcs while it is choosing the letters instead of after it has chosen them all.
Twelve creases a micrometre long
A patch this collection has drawn for a long time carries a hundred and forty-two creases and a hundred and thirty arcs, and nobody had asked what the other twelve were. They are fragments left where the clip caught a pleat almost exactly at a corner — between one and nine micrometres long on a printed sheet, at one turn angle out of four, and it is the turn the collection prints.
Four easy patches and one that is not
Run the same search a hundred and twenty times on each of five tessellation patches, changing nothing but the order the letters are tried in. Four of them answer in between twenty-five and fifty-three steps every single time. The fifth answers in eighty-four steps at best, a hundred and sixty-six in the middle, and does not answer at all in forty-eight runs of the hundred and twenty.
Where a sector crosses sixty
Turn the twist polygons of a tessellation patch a hundredth of a radian further and the pattern goes from having no mountain-valley labelling at all to having one immediately. Nothing about its graph changes across the transition — the same eighty-three panels, the same hundred and forty-two creases, the same four labellings at every one of its sixty vertices. What changes is which sector at a vertex is the smallest one.
The difficulty was in the coin
One tessellation patch, one search, one test at every node — and a cost that runs from eighty-six steps to fifteen thousand depending on nothing but the starting seed. The heavy tail is real, it was measured carefully, and it was made by a single line of the search that nobody had thought of as a choice at all.
Half a rim
A rectangle of tessellation cut out of the plane has four edges; glued into a torus it has none. Gluing one pair and leaving the other gives the middle of the scale — the same drawing, the same vertices, the same conditions asked of them, and exactly half the rim. What the rim costs turns out to be measurable per edge rather than only at the ends.
The rim adds up
What one glued pair of a cell's edges saves in free letters is what the other pair saves, and gluing both saves the sum. That is a rate rather than an observation, it is the form of the claim two objects could never support, and it is what makes 'the rim costs four letters a cell' a statement about tessellations rather than about one drawing.
Euler counts the gluing
Vertices minus creases plus panels comes to one on a rectangle of paper and nought on any gluing of it. That is the cheapest check that an identification did what it says, it costs three counts already being made, and it is what found a crease running exactly through the corner of a cell — a case the corner search could not see and no other check would have noticed.
Half the slack
Gluing one pair of a cell's edges removes half the free letters and costs almost nothing. Gluing the second pair removes the other half and costs three orders of magnitude. The letters go linearly and the search does not, and the reason is that the last free letter is worth more than all the others.
Which pair is glued
A cell's two cylinders have the same Euler number, the same amount of rim and the same name. On a symmetric drawing they have identical counts of letters, panels and vertices — and searching them costs twenty-four nodes one way and eighty-five the other. Half the rim is a description of the topology and not of the object.
A cut is surgery
Two cuts that look identical on the paper do completely different things to the sheet. A slit run inward from the rim changes nothing at all; a closed cut in the middle removes a disc and leaves a sheet carrying a condition it did not have before. What separates them is not the length of the cut or how much paper it removes.
Two holes are two conditions
One hole in a sheet of paper gives one loop that cannot be shrunk and one parity to satisfy. Two holes give two, and they are independent: an arrangement of creases can satisfy the condition round one hole and fail the condition round the other, and the sheet refuses on the strength of the one it failed.
The cost of asking the wrong sheet
A test written for a sheet with an edge, run on a sheet without one, does not fail. It exhausts — proving, at three, thirty-five and three thousand four hundred and fifty-five nodes, that no lettering exists — and the letterings it proved impossible fold, on the collection's own machinery, at every size they were tried at.
One population, four sheets
A population of patterns is a way of asking what is typical, and it has always been a population of drawings. Put the same drawings on four different sheets and the verdicts move — not because the drawings changed but because the sheet did, which means a population has two halves and only one of them was ever chosen.
The seam that is not a symmetry
Gluing a cell's edges looks like a symmetry of the drawing and is not. It is an instruction about which points of the paper are the same point, the drawing has to agree with it along the whole of a glued edge, and a rectangle that is not a period of the pattern does not glue at all — which turns out to be the only real restriction on which cylinders exist.
A metamaterial with no edge
A folded metamaterial's properties are quoted per unit cell, because a material is supposed to be the same everywhere and a cell is supposed to stand for the whole of it. Every cell this collection has measured has been cut out of a patch, with a rim round it — and a rim is the one place a repeating material is not like itself.
A bottom layer on half a rim
The bottom of a folded stack lives at the paper's edge, which is why a sheet with no edge has an order with no least element. A cylinder has half a rim, so it has a bottom — and the count of panels that could be it falls with the rim, which makes the claim a measurement rather than a boundary case.
The drawing does not say what is glued
One crease pattern, four sheets, four different answers to whether it folds — and nothing in the drawing distinguishes them. The identification is data the picture cannot carry, and the picture is the object this collection has been treating as complete.
A sheet with two edges
Design in this subject starts from a square, and the square's four edges are where every flap ends and every construction begins. A cylinder has two edges instead of four, and what a designer loses turns out to be measurable in the same letters a search counts — and what they gain is that the sheet is what gets manufactured.
The symmetry a gluing adds
A patch of a tessellation has whatever symmetry its outline allows — a few reflections, a rotation or two. Glue its edges and it acquires translations, and a lettering of the glued sheet has to be invariant under them. That is a much stronger requirement than a lettering of the patch, and it is why one answer covers every patch at once.
The cut that changes nothing
A slit goes right through the material and leaves the sheet exactly the object it was. A closed cut removes almost no paper and produces a different sheet with a condition it did not have. Kirigami is made almost entirely of the first kind, which is why every result about it survives the distinction untouched.
Each drawing has its own threshold
Gluing a cell's edges was measured once, at one size, and found to cost three orders of magnitude — which cannot tell a threshold from a slope, nor say whether a cut sheet has one further out. Swept from one period to five on four tilings, every sheet starts at about a third of a node per free letter and every drawing leaves that behaviour at a size of its own: four periods on the square grid, three on the honeycomb, two on the triangular grid and two on the rhombille, where even the cut sheet crosses.
The route, not the sheet
Every cost measured for a glued sheet has been one number from one branch order, and a backtracking search's cost belongs to the pair. Asked under eight orders instead of one, a cut cell's cost barely moves — 42 to 55 nodes — while the torus over the same drawing runs from 69 to 24,636, with one order giving up entirely. The glued sheet's best order costs less than twice the cut sheet's, so most of what a single order charged to the gluing belongs to the route through it.
A stub is never alone
A crossing is a crease running past another and it has a depth. A stub is a crease that simply stops, and it has one too — how far from the rim it stopped, which is also how much shorter than a crease it is. Measured across a hundred and twenty drawings: sixty-six stubs, from 0.27 mm to 35 mm at printed size, every one of them paired with another at exactly the same distance, and not one on a drawing that did not already have a crossing.
Two faults, not four
A drawing departs from its crease list in four named ways — a crossing, a stub, a junction and a fragment — and a checker tests for all four. Counted side by side on two hundred and forty drawings, two of the tests find nothing the others do not. No crease anywhere ends on another crease: every junction the reading finds is a crease meeting the rim, which is where creases are meant to end. Every stub is on a drawing that already has a crossing. What is left is two independent faults, and the clipped construction, which makes no crossings, still makes the second — creases a thousandth of a millimetre long, in pairs.
The cheapest route crosses later
A search for a consistent lettering has a threshold: below it the letters propagate and the cost is a third of a node per crease, above it the search backtracks and the cost explodes. The threshold was measured with one branch order. Measured with eight, the cheapest route never starts searching before the typical one, and on most sheets it starts a period or two later — so part of every threshold on the record belongs to the route. And the one cut sheet past its threshold, the rhombille's, spreads across nearly three orders of magnitude of cost, which moves the spread off the gluing and onto the threshold.
Named alongside it
The objects these essays reach for when they reach for this one.
BoundaryGluingPeriodicityPanelSearch costSearchTessellationMeasurementCountingCrease assignmentCrease patternFlat-foldability